安裝iDeneb時 選擇目的宗卷可是一片空白
一開始都正常,選擇簡體中文,然后同意協議,接著就出現了選擇要安裝mac的宗卷類似的話,可是下面都為空白~于是就選擇了磁盤工具,左面的硬盤盤符都是灰色的,我選了我與現在Vista下分出的那個區 11GB,FAT32格式,然后抹掉,選的是Mac擴展日志式,抹完了之后推出磁盤工具,可是還是找不到目的宗卷,總是搜不著真是奇怪啊~
----------------------------------------------------
進入安裝界面后,要點實用程序中的磁盤工具,在里面抹盤的。不抹成HFS格式,目的宗卷哪有可能會出現盤符。
還有,如果你抹盤后仍然找不到的話,那就是抹盤失敗的原因了。這時要用WINPM把分區格為FAT32,然后改ID為AF。
BIOS設置 我也分別選擇過IDE 和 AHCI 還是一樣的結果!
把你的BIOS里打開AHCI,然后把你的硬盤接在SATA1上就可以了
安裝MAC OS X要用FDISK進行分區、格式化、激活。
先分出一個主分區來,在DOS狀態下,用PQ弄一個主分區。然后再安裝就可以啦
先用抹盤工具給MAC分好區才可以的。剛安裝界面的時候有個磁盤工具,選擇一個要安裝的分區,點抹掉,格式是mac擴展日志式,最上面的一個分區格式,這樣在安裝就有了目標分區了
問題我解決了,在Vista下裝Partition Manager 9 霏凡下載的,然后格盤fat32,改ID 為AF,之后就安程序來就行了。不過我遇到了成功安裝但進不了MAC的麻煩1
1)打開XP(或Vista)的開始->運行,輸入diskpart
2)輸入list disk (作用是察看機器磁盤號等,1個硬盤則為 0,2個則為 0、1,依次類推)
3)我只有一個硬盤于是就輸入select disk 0,有2個硬盤的就輸入你想安裝MAC那個硬盤的編號
4)輸入list partition (作用是察看分區號和其它信息,1個分區則為1,2個則為1、2,依次類推)
5)輸入select partition x (x為需要轉換的分區的編號,我這里是3)
6)輸入delete partition (刪除所選分區)
7)輸入create partition primary id=AF (建Mac OS的HFS+主分區)
8)完成退出
這個時候就已經完成安裝Mac OS的分區格式化成HFS+了。
hi, have you ever use the disk utility?s?
the same problem i have 2 days before (i?m build a Hackintosh for a friend).
i used different Names for the drives such as "Leopard", Mac, Leo" and other...i don?t know why but after change of the diskname i saw the drives to install and get many times later a successfull install on older hardware such Asrock Board, Intel P4 and so on! Have you choose MBR?
I think you'll find that the problem you're having is because the drive you want to install iDeneb on needs to be unallocated (not formatted). If you are running XP you will need a third-party program to release the space (normally this is referred to as "shrinking"). Although you could try the routine below, it might work:
Boot up from the iDeneb iso disk and after you select your language go to the Utilities menu and select Disk Utility before clicking on Continue.
Your drives should show up in the utility window and you can select the volume you created for the installation and then erase it.
Make sure you select Mac Extended Journalled as the format, and give it a name.
Once the volume is re-formatted you can exit Disk Utility and click Continue on the installation screen.
The volume should now be visible, so select it as the installation drive and click install.
Click Customize on the next screen and check the appropriate boxes as required by your system. These are often not as intuitive as they might be, but if you take notes while exploring your System Device Manager in XP it should become a little clearer. Once you've selected the various fixes and applications click Done and then continue with the installation.
?
http://www.insanelymac.com/forum/lofiversion/index.php/t138452.html
更多文章、技術交流、商務合作、聯系博主
微信掃碼或搜索:z360901061

微信掃一掃加我為好友
QQ號聯系: 360901061
您的支持是博主寫作最大的動力,如果您喜歡我的文章,感覺我的文章對您有幫助,請用微信掃描下面二維碼支持博主2元、5元、10元、20元等您想捐的金額吧,狠狠點擊下面給點支持吧,站長非常感激您!手機微信長按不能支付解決辦法:請將微信支付二維碼保存到相冊,切換到微信,然后點擊微信右上角掃一掃功能,選擇支付二維碼完成支付。
【本文對您有幫助就好】元
